{"id":5369,"date":"2023-02-23T17:29:08","date_gmt":"2023-02-23T16:29:08","guid":{"rendered":"https:\/\/www.goodiesrc.com\/?p=5369"},"modified":"2023-12-31T10:25:54","modified_gmt":"2023-12-31T09:25:54","slug":"rc-car-not-working","status":"publish","type":"post","link":"https:\/\/www.goodiesrc.com\/rc-car-not-working\/","title":{"rendered":"RC Car Not Working? Top 4 Most Common Reasons And Fixes!"},"content":{"rendered":"\n

If you’re an RC car enthusiast, you know that there’s nothing quite like the thrill of racing your miniature machine. However, it can be equally frustrating when your car suddenly stops working.<\/p>\n\n\n\n

The main reason behind your non-functioning RC car is most likely faulty batteries. But, there could be other reasons as well, such as loose connections in the wirings that are linked with the ESC, or problems with the switch or the servo.<\/strong><\/p>\n\n\n\n

\"RC
RC Car with it’s body and controller next to it<\/figcaption><\/figure>\n\n\n\n

This comprehensive guide covers everything you need to know about an RC car that is not working along with solutions to make it run again. So keep reading till the end to explore more!<\/p>\n\n\n\n

Why Your RC Car Is Not Working And How To Fix It<\/h2>\n\n\n\n
Common Reasons<\/strong><\/td>Fixes<\/strong><\/td><\/tr>
Faulty Batteries<\/td>Replace The Faulty Batteries<\/td><\/tr>
Loose Connection<\/td>Reattach The Wires Firmly<\/td><\/tr>
Switch Not Working<\/td>Repair Or Replace The Switch<\/td><\/tr>
Servo Issue<\/td>Replace The Damaged Servo<\/td><\/tr><\/tbody><\/table>
Table showing the most common reasons why your RC car is not working<\/figcaption><\/figure>\n\n\n\n

#1. Faulty Batteries<\/h3>\n\n\n\n

Issue Explanation:<\/strong><\/p>\n\n\n\n

One of the most common reasons why your RC car may not be functioning correctly is faulty batteries. This issue can arise due to overuse or prolonged storage without use, leading to reduced battery life. When your batteries are faulty, your RC car will fail to respond or turn on. But to determine if this is indeed the issue, you’ll need to take a closer look at your batteries.<\/p>\n\n\n\n

First, remove the batteries from your RC car and check if a voltage reading is displayed. If you don’t see any reading, it’s likely that your batteries have gone bad.<\/p>\n\n\n\n

Most RC cars use LiPo (Lithium Polymer) batteries<\/strong><\/a>, which can last up to three years with proper maintenance. However, if you’ve been using your batteries frequently or leaving them unused for prolonged periods, their lifespan may be significantly shorter.<\/p>\n\n\n\n

SOLUTION:<\/strong><\/p>\n\n\n\n

The good news is that this issue is easy to fix. All you need to do is replace the batteries with new ones that have a full charge. Once you have new batteries, your RC car should be up and running again in no time.<\/p>\n\n\n\n

To ensure your batteries last as long as possible, it’s essential to take good care of them. Avoid overcharging or over-discharging them, and store them in a cool, dry place when not in use. <\/p>\n\n\n\n

Also read: How, Where And When To Store Your RC Trucks<\/a><\/strong><\/p>\n\n\n\n

#2. Loose Connection In Wiring<\/h3>\n\n\n\n

Issue Explanation:<\/strong><\/p>\n\n\n\n

If replacing the batteries didn’t fix the issue, the next step is to check for loose wiring connections.<\/p>\n\n\n\n

To start, you’ll need to remove the outer coverings of your RC car using screwdrivers. Once you have access to the internal wiring, inspect it carefully for any signs of looseness or disconnection.<\/p>\n\n\n\n

In most cases, the wiring that’s connected with the ESC (Electronic Speed Controller) can come loose over time, making it unable to transmit the electric current properly to the rest of the parts of the RC car.<\/p>\n\n\n\n

SOLUTION:<\/strong><\/p>\n\n\n\n

If you do find loose connections, it’s crucial to reattach them firmly. You can use a soldering iron to re-solder the wires back to their original connections. Alternatively, you can use wire connectors to fix any loose connections.<\/p>\n\n\n\n

Make sure to double-check that all the connections are secure and that there are no loose wires left before reassembling your RC car.<\/p>\n\n\n\n

#3. Switch Problem<\/h3>\n\n\n\n

Issue Explanation: <\/strong><\/p>\n\n\n\n

If you’ve already checked the batteries and wiring, the next step is to investigate the switch.<\/p>\n\n\n\n

To do this, you’ll need to remove the switch from your RC car and test it to see if it’s functioning correctly. This can be a bit tricky, as you’ll need a voltmeter to test the switch accurately. A voltmeter is a device that measures the electric potential difference between two points in a circuit.<\/p>\n\n\n\n

Once you have a voltmeter<\/a> (Amazon link) handy, connect it to the switch and test its voltage reading. If the switch is working correctly, you should see a voltage reading that corresponds to the on\/off position of the switch. If there’s no reading, or if the reading is erratic, it’s likely that the switch is faulty and needs to be replaced.<\/p>\n\n\n\n

SOLUTION:<\/strong><\/p>\n\n\n\n

If you’re having trouble with a switch in your RC car, don’t worry – there are a few things you can do to get it working again. One option is to try fixing the switch yourself, while the other is to replace it with a new one.<\/p>\n\n\n\n

The first step is to remove the switch from your RC car and give it a good cleaning with a relevant lubricant oil. This can help to remove any dirt or debris that may be causing the switch to malfunction.<\/p>\n\n\n\n

Once you’ve cleaned the switch, it’s a good idea to test it by turning it on and off a few times. This can help to loosen any stuck parts and get the switch working again. If the switch still isn’t working correctly, you may need to try disassembling it and inspecting it more closely for any damage or wear and tear.<\/p>\n\n\n\n

If repairing the switch doesn’t do the trick, you may need to replace it altogether.<\/p>\n\n\n\n

Replacing a faulty switch can be done relatively easily, even if you’re not particularly skilled at DIY projects. You’ll need to purchase a replacement switch that’s compatible with your RC car’s electrical system, and then follow the manufacturer’s instructions to install it properly. Usually, you can purchase a replacement switch from your local hobby store or online retailer.<\/p>\n\n\n\n

With a bit of patience and some careful work, you can get your RC car’s switch back in working order and hit the road (or track) once again!<\/p>\n\n\n\n

#4. Servo Problem<\/h3>\n\n\n\n
\n